1. Products
  2. Tungsten speciality parts
  3. Tungsten mesh heaters

Tungsten mesh heaters.

Tungsten wire mesh heating elements for vacuum and hydrogen furnaces, supplied to your drawing from Vadodara, India.

3,422 °Cmelting point of tungsten
Vacuum · H₂ · inertoperating atmospheres
To your drawingmesh, size and terminals
The basics

What is a tungsten mesh heater?

In short

A tungsten mesh heater is a heating element made of tungsten wire woven or knitted into a mesh, usually formed into a cylinder, that heats a furnace hot zone by electrical resistance. It is run in vacuum, hydrogen or inert gas.

Tungsten mesh heaterTungsten mesh heater
Tungsten mesh heaterTungsten mesh heater
Tungsten mesh heatersTungsten mesh heaters

Tungsten mesh heaters are also called tungsten heating elements, tungsten mesh heating elements or tungsten wire mesh heaters. Asaus Technologies supplies them from Vadodara, Gujarat, made to your drawing, to customers across India.

How it works

How a tungsten mesh heater is built.

01

Mesh

Fine tungsten wire is woven or knitted into a mesh.

02

Form

The mesh is rolled into a cylinder or shaped to the hot zone.

03

Connect

Terminals or straps join it to the furnace electrodes.

Read the full guide

Applications

Where tungsten mesh heaters are used.

  • High-temperature vacuum furnaces for heat treatment, brazing and sintering.
  • Crystal growth furnaces, for example sapphire growth.
  • Hydrogen and inert gas furnaces that run above the range of molybdenum heaters.

Suitability depends on the furnace design, temperature and atmosphere.

Specifications

Typical properties.

PropertyTypical value for tungsten
Melting pointabout 3,422 °C (highest of any metal)
Densityabout 19.25 g/cm³
Electrical resistivity (20 °C)about 5.3 µΩ·cm
Thermal conductivity (20 °C)about 173 W/m·K
Thermal expansionabout 4.5 ×10⁻⁶ per K
Atmospheresvacuum, dry hydrogen, inert gas (not air)
Form we supplymesh heaters made to your drawing

Typical published values for tungsten, not a guarantee for a specific lot. Mesh, wire size and shape follow your drawing and are confirmed in the quotation.

Request datasheet Ask an engineer

Compared

Tungsten vs molybdenum heaters.

TungstenMolybdenum
Temperature rangeHighest of the metal heatersRoughly up to 1,600 to 1,800 °C
AtmosphereVacuum, hydrogen, inertVacuum, hydrogen, inert
In air at heatOxidises quicklyOxidises quickly
CostHigherLower

General comparison only. The furnace maker sets the temperature limit for a given design.

Tungsten, molybdenum and graphite compared

Atmosphere

Why tungsten heaters need vacuum or hydrogen.

In short

Hot tungsten oxidises quickly in air and the oxide is volatile at high temperature, so the wire is lost. Run tungsten heaters in vacuum, dry hydrogen or inert gas, and handle used heaters gently because they become brittle.

Atmosphere and care guide

Supply

Tungsten mesh heaters from Asaus Technologies.

Asaus Technologies is an independent supplier, not a manufacturer. We supply tungsten mesh heaters and tungsten trays to your drawing from Vadodara across India. If you are replacing a heater, send photographs of the old one with a ruler and its measurements.

Tungsten trayTungsten tray
Get a quote

What to send us.

  • Furnace make and model, and a hot-zone drawing if available
  • Heater dimensions: diameter, height, slots
  • Mesh and wire size, from the old heater if replacing
  • Terminals and mounting design
  • Power, maximum temperature and atmosphere
  • Quantity and delivery timeline
Guides

Tungsten heater guides.

All guides

FAQ

Tungsten mesh heaters, answered.

What is a tungsten mesh heater?

A tungsten mesh heater is a heating element of woven or knitted tungsten wire, usually formed into a cylinder, that heats a furnace hot zone by electrical resistance. It is run in vacuum, hydrogen or inert gas.

Where are tungsten mesh heaters used?

They are used in high-temperature vacuum furnaces, for example in crystal growth furnaces such as sapphire growth, and in sintering, brazing and heat treatment at very high temperature.

What temperature can a tungsten heater reach?

Tungsten melts at about 3,422 °C, the highest of any metal, and tungsten heaters are used well above the range of molybdenum heaters. The safe operating temperature depends on the atmosphere and the furnace design, so confirm it with the furnace maker.

Can a tungsten heater be used in air?

No. Hot tungsten oxidises quickly in air and the oxide becomes volatile at high temperature. Tungsten heaters are run in vacuum, dry hydrogen or inert gas such as argon.

What is the difference between tungsten and molybdenum heaters?

Both are refractory metal heaters used in vacuum, hydrogen and inert gas. Molybdenum is used at lower temperatures, roughly up to 1,600 to 1,800 °C, and costs less. Tungsten is used at higher temperatures but costs more.

Why is a tungsten heater made of mesh?

A mesh gives a large radiating surface and spreads the current across many wires, which helps heat the load evenly. The exact mesh and shape follow the furnace design.

Are used tungsten heaters brittle?

Yes. Tungsten that has been run at high temperature becomes brittle, so a used heater should be handled gently and not re-bent.

What should I send to get a quotation for a tungsten mesh heater?

Send the furnace make and model, a hot-zone drawing if available, heater dimensions, mesh and wire size, terminal design, power rating, maximum temperature, atmosphere and quantity. Photographs of the old heater with a ruler help.

Do you also supply tungsten trays?

Yes. Asaus Technologies also supplies tungsten trays made to your drawing. Send the dimensions, thickness and quantity.

Does Asaus Technologies manufacture tungsten mesh heaters?

Asaus Technologies is an independent supplier, not a manufacturer. We supply tungsten mesh heaters to your drawing and specification from Vadodara across India.

Enquire

Tell us what you need.

Share a drawing, a part list or a short description. We will confirm what we can supply and quote.