- Tungsten weight calculator
Tungsten weight calculator.
Work out the weight of a tungsten or heavy alloy part from its dimensions, and see what the same weight would take in lead, steel or copper.
Theoretical weight of a solid shape using typical published densities. Holes, chamfers, coatings and the density of the actual lot change the real weight. Heavy alloy figures use the middle of each ASTM B777 range.
The formula.
Weight (kg) = volume (cm³) × density (g/cm³) ÷ 1,000. Volume comes from the shape:
- Block or plate: length × width × height
- Solid cylinder: π × (diameter ÷ 2)² × height
- Tube or ring: π × ((outer diameter ÷ 2)² − (inner diameter ÷ 2)²) × height
- Sphere: π × diameter³ ÷ 6
Enter dimensions in millimetres. A worked example: a pure tungsten cylinder of 50 mm diameter and 100 mm height has a volume of about 196.3 cm³ and weighs about 3.78 kg.
Densities used.
| Material | Density (g/cm³) |
|---|---|
| Pure tungsten | 19.25 |
| Tungsten heavy alloy, Class 1 (90% W) | 17.05 |
| Tungsten heavy alloy, Class 2 (92.5% W) | 17.50 |
| Tungsten heavy alloy, Class 3 (95% W) | 18.05 |
| Tungsten heavy alloy, Class 4 (97% W) | 18.55 |
| Molybdenum | 10.28 |
| Lead | 11.34 |
| Copper | 8.96 |
| Structural steel | 7.85 |
| Aluminium | 2.70 |
Typical published values. See tungsten heavy alloy vs pure tungsten and tungsten vs lead vs steel.
Calculator questions.
How do I calculate the weight of a tungsten part?
Multiply the volume of the part by the density of the material. Weight in kg equals volume in cm³ times density in g/cm³ divided by 1,000. For pure tungsten the density is about 19.25 g/cm³, so one litre (1,000 cm³) weighs about 19.25 kg.
What density should I use for tungsten heavy alloy?
Tungsten heavy alloy is commonly specified to ASTM B777 in four classes, with densities of roughly 16.85 to 17.25 g/cm³ (90% tungsten) up to 18.25 to 18.85 g/cm³ (97% tungsten). The calculator uses the middle of each range. Use the density on your material certificate for a final figure.
How accurate is the calculator?
It gives the theoretical weight of a solid shape using typical published densities. Real parts differ slightly because of tolerances, holes, chamfers, coatings and the density of the actual lot, so treat the result as an estimate and confirm with your supplier.
How much smaller is a tungsten part than a lead part of the same weight?
Pure tungsten takes about 41% less volume than lead for the same weight, and tungsten heavy alloy about 37% to 41% less, because lead has a density of only about 11.34 g/cm³.
Can Asaus Technologies supply the part I calculate here?
Yes. Send the drawing, target weight, alloy or density preference and quantity through the contact page and we will quote tungsten ballast or counterweights to your drawing. Asaus Technologies is an independent supplier, not a manufacturer.
Need tungsten ballast to your drawing?
Send the drawing, target weight and quantity and we will quote.
