Pure tungsten is the densest option but is hard and brittle to machine. Tungsten heavy alloy is slightly less dense, much easier to machine and is the usual choice for counterweights and ballast.
Pure tungsten
Density is about 19.25 g/cm³. It is very hard and brittle, so it is normally formed by sintering and finished by grinding or similar methods. It suits cases where the highest density or very high temperature use is needed.
Tungsten heavy alloy (ASTM B777)
Heavy alloy is commonly specified to ASTM B777, which groups it into classes by tungsten content.
- Class 1: 90% tungsten, about 16.85 to 17.25 g/cm³
- Class 2: 92.5% tungsten, about 17.15 to 17.85 g/cm³
- Class 3: 95% tungsten, about 17.75 to 18.35 g/cm³
- Class 4: 97% tungsten, about 18.25 to 18.85 g/cm³
These are typical published values, not a guarantee for a specific lot.
Magnetic behaviour
Heavy alloys with a nickel-iron binder can be slightly magnetic, while nickel-copper versions are non-magnetic. If magnetic behaviour matters for your assembly, say so in the enquiry.
How to choose
For most counterweights, a heavy alloy class that meets the weight in the space available is enough. Choose pure tungsten only when density or temperature demands it. Confirm the class and certificate in the quotation.
Need tungsten speciality parts?
Tell us the weight, space and alloy preference for your tungsten part. Request a quote.
