In short
Investment casting gives a fine finish and tight tolerance on small, intricate parts. Sand casting is cheaper for large or simple parts and cheaper to tool.
Compared
| Investment | Sand | |
|---|---|---|
| Part size | Small to medium | Small to very large |
| Surface finish | Fine | Rougher |
| Tolerance | Tighter | Wider |
| Tooling cost | Higher | Lower |
Choosing
Decide by size, finish and quantity. A drawing and sample usually settle the choice quickly.
Related guides
- How to order power plant spares: What to include when requesting power plant spares: OEM, model, part numbers, drawings, nameplate photos and quantity, for a…
- OEM vs drawing-based spares: The difference between OEM spares and spares made to your drawing, with a checklist of what to verify before choosing either…
- What is stainless steel casting?: Stainless steel casting pours molten stainless steel into a mould to form complex shapes such as pump casings and valve…
- Stainless casting grades CF8 and CF8M: CF8, CF8M, CF3 and CF3M are common stainless steel casting grades under ASTM A351 and A743. See how they match wrought grades…
What to send us
- Spares list with part numbers
- Drawings and material specification
- OEM and equipment
- Delivery timeline and documents
About power plant spares from Asaus Technologies
Asaus Technologies is an independent supplier based in Vadodara, Gujarat, and supplies power plant spares across India. Spares and replacement components, matched to your drawings and part numbers. See the power plant spares page.
Need power plant spares?
Send the drawing or sample and we will discuss the route. Request a quote.
