In short
Open die forging is flexible and cheap to set up, so it suits large or few parts. Closed die forging needs costly dies, so it pays off on larger runs of complex shapes.
Side by side
| Open die | Closed die | |
|---|---|---|
| Shape | Simple | Complex |
| Tooling cost | Low | High |
| Quantity | One to small batch | Medium to large batch |
| Tolerance | Looser, more machining | Tighter, near-net |
| Part size | Very large possible | Smaller to medium |
Choosing
Start with quantity and shape. If unsure, send the drawing: the better route is often clear from it.
Related guides
- Forged vs cast components: Forged and cast parts compared on strength, fatigue, defects, shape freedom and cost, and when to choose each for load-bearing…
- How to order forgings: What a supplier needs to quote a forging: drawing, material grade, heat treatment, testing, certificates and quantity, so your…
- What is stainless steel forging?: Stainless steel forging shapes hot metal under compressive force for a dense, strong part. Learn how it works, where it is…
- Stainless steel grades for forgings: Common stainless steel grades for forgings: 304, 304L, 316, 316L, 321 and 347. What each offers and how to choose between them…
What to send us
- Drawing or specification
- Material grade or standard
- Quantity and delivery timeline
- Testing and certification needed
About forgings from Asaus Technologies
Asaus Technologies is an independent supplier based in Vadodara, Gujarat, and supplies forgings across India. Forged pipes, flanges and components to your drawing and specification. See the forgings page.
Need forgings?
Send the drawing and quantity for a quotation. Request a quote.
