1. Blog
  2. What is closed die forging?

What is closed die forging?

A plain explanation of closed die (impression die) forging.

GuideUpdated 19 November 2026By Asaus Technologies
In short

Closed die forging presses heated metal into a shaped cavity cut into two dies. The part comes out close to final size, with a thin edge of excess metal, called flash, trimmed off.

How it works

A heated billet is placed in the lower die and the upper die closes under high force. The metal fills the cavity, and the flash is trimmed away afterwards.

Benefits

  • Near-net shape with less machining
  • Consistent parts across a large batch
  • Tighter tolerances than open die forging

Related guides

  • Forged vs cast components: Forged and cast parts compared on strength, fatigue, defects, shape freedom and cost, and when to choose each for load-bearing…
  • How to order forgings: What a supplier needs to quote a forging: drawing, material grade, heat treatment, testing, certificates and quantity, so your…
  • What is stainless steel forging?: Stainless steel forging shapes hot metal under compressive force for a dense, strong part. Learn how it works, where it is…
  • Stainless steel grades for forgings: Common stainless steel grades for forgings: 304, 304L, 316, 316L, 321 and 347. What each offers and how to choose between them…

What to send us

  • Drawing or specification
  • Material grade or standard
  • Quantity and delivery timeline
  • Testing and certification needed

About forgings from Asaus Technologies

Asaus Technologies is an independent supplier based in Vadodara, Gujarat, and supplies forgings across India. Forged pipes, flanges and components to your drawing and specification. See the forgings page.

Need forgings?

Send us your drawing and annual quantity for a discussion. Request a quote.

Enquire

Tell us what you need.

Share a drawing, a part list or a short description. We will confirm what we can supply and quote.